How do I remove a specific vlan from a trunk port?

Remove VLANs from a vPC Log in to the Cisco Nexus series switch. To run the configuration, type: Switch-A# config terminal. Type: Switch-A(config)# interface port-channel port_channel_number. To delete the VLAN ID, type: Switch-A(config-if)# switchport trunk allowed vlan remove VLAN_IDs.

Leggi di più

Di conseguenza,, how do i delete a vlan interface?

Remove the VLAN by performing one of the following steps: To delete the VLAN temporarily, use the -t option as follows: # dladm delete-vlan -t vlan. To make the deletion persist, perform the following: Remove the VLAN. # dladm delete-vlan vlan. Remove the /etc/hostname. vlan-interface file. Inoltre,, how do i get rid of voice vlan? To remove voice VLAN, use the no switchport voice vlan interface configuration command or the switchport voice vlan none interface configuration command.

Anche la domanda è:, how do i configure vlan on hp switch?

To configure basic VLAN settings: Enter system view, use the command: system view. Create VLANs, use the command: vlan { vlan-id1 [ to vlan-id2 ] | all } Enter VLAN view, use the command: vlan vlan-id. Configure a name for the VLAN, use the command: name text. Configure the description of the VLAN, use the command: Tenendo presente questo,, how do i find the ip of a vlan on a switch? show ip interface brief - will give you the IP address information of ANY layer 3 interface - so this is a very helpful command to remember.. 10 lug 2012

Di conseguenza,, what is gvrp cisco?

Generic Attribute Registration Protocol (GARP) VLAN Registration Protocol (GVRP) is an application defined in the IEEE 802.1Q standard that allows for the control of VLANs. GVRP runs only on 802.1Q trunk links. GVRP can be configured to dynamically add and manage VLANS to the VLAN database for trunking purposes. What is Gvrp Aruba? To enable GVRP. GARP is an IEEE 802.1Q-compliant protocol that facilitates VLAN registration and controls VLANs within a larger network. in the Mobility Access Switch, you must configure the following two profiles and attach them to a trunk port:  gvrp—To enable GVRP globally.

What is Pvid?

A Port VLAN ID (pvid) is a default VLAN ID that is assigned to an access port to designate the virtual LAN segment to which this port is connected. The pvid places the port into the set of ports that are connected under the designated VLAN ID.

Lascia un commento

Invia commento
CAPTCHA ERROR